ACTIVE MOLD REMOVER
WHAT IT'S FOR
- Quickly removes mold and sanitizes surfaces in stone, plaster, concrete, terracotta, joints, ceramic, glass and marmorino
BENEFITS
- PRACTICAL ERGONOMIC PACKAGING WITH SPRAYER
- IDEAL VISCOSITY: IT CAN BE EASILY APPLIED TO THE WALL
- FAST ACTION, EFFECTIVE IN A FEW MINUTES
- EVEN CLEANS THE JOINTS EFFECTIVELY
IDEAL FOR
- PORCELAIN STONEWARE
- CERAMIC
- NATURAL STONES
- WALL PAINTS AND MARMORINO
- CONCRETE AND JOINTS
- COOKED
- KLINKER
SURRENDER - With a liter of product I do:
- 10-20 m² depending on the absorption of the surface. The yield is indicative
DEMONSTRATIVE VIDEO
https://youtu.be/OIB0IObYEtw
ACTIVE 1 - active mold remover 500 ml
How to use?
Ready to use: no need to dilute
Application:
Spray ACTIVE1 directly on the surface to be cleaned by holding the bottle in a vertical position at a distance of about 15-20 cm from the point of application.Leave on for about 15 minutes. Dab any excess product with a damp cloth to avoid possible dripping. If necessary, repeat the operation, then rinse with a damp sponge.
To prevent mold from re-forming, it is recommended to apply after cleaning ACTIVE2 for active protection from mold.
Air the rooms well during and after use (about 4 hours of ventilation but if the perception of chlorine persists, continue to ventilate until it disappears). Before proceeding with the painting it is recommended to wait about 12 hours.
ATTENTION!
Do not spray on wood, plants, fabrics and metals, in this case wash immediately with water. Do not use on new polished stones. Attention: On colored plasters, check in advance on a small portion of the surface for any changes in color. Use biocides with caution. Always read the label and product information before use. The use of suitable protective clothing and gloves is recommended during use. In case of poor ventilation wear a respiratory mask.