top of page
CONCRETE SHIELD - reviving stain protector for concrete 5L
ANTI-STAIN PROTECTOR REVIVING FOR CONCRETE
 
 WHAT IT'S FOR
  •  To revive concrete surfaces indoors and out and protect against stains and water
  •  Creates protection that facilitates the removal of oil and grease before they penetrate the surface
  •  For outdoor applications on, self-locking, terrazzo and stamped concrete, it gives resistance to atmospheric agents
  •  On industrial floors, warehouses, showrooms and garages, it consolidates the surface making it dustproof
  •  On interior floors for residential use, the treatment can be completed by applying a wax finish
 
 BENEFITS
  •  ECO-FRIENDLY PRODUCT: WITHOUT HYDROCARBON SOLVENTS
  •  REVERSIBLE TREATMENT
  •  CONSOLIDATING AND ANTI-DUST ACTION
  •  RESISTANT TO UV RAYS (ASTM G154)
  •  WATER BASED: CAN BE APPLIED ON SURFACES WITH RESIDUAL HUMIDITY: DRASTICALLY REDUCED WORKING TIMES
  •  PRODUCT CLASSIFIED A + ACCORDING TO FRENCH VOC REGULATION
 
 IDEAL FOR
  •  CEMENT
  •  PRINTED CONCRETE
  •  SELF-LOCKING
  •  CONCRETE JACKS
 
 SURRENDER -  With a liter of product I do:
  •  Cement  10-15 m²
  •  "The yields are indicative and are intended per hand"

CONCRETE SHIELD - reviving stain protector for concrete 5L

€64.00Price
Quantity

  • How to use?

    No dilution:  ready to use

    Application: 
    Shake before using.

    On a dry and clean surface, apply  CONCRETE SHIELD  with brush, fleece or roller on a regular basis. Once the first coat has dried (after 4 hours), in the case of an absorbent surface, apply a second coat of the product following the same procedure.

    For indoor domestic environments: 4 hours after applying  CONCRETE SHIELD apply a coat of finishing wax according to the desired aesthetic effect: matt matt, glossy LONGLIFE.

    For exteriors: it is recommended to apply the product annually to maintain the optimal revitalizing aesthetic effect.

  • ATTENTION!

    In case of incorrect application and when a total protection reset is required, remove  CONCRETE SHIELD  using  PS87 PRO. On interior floors for domestic use (microcement, quartz concrete, etc.) do a compatibility test with the surface before carrying out the treatment. In the case of smooth or smooth-finished cements  CONCRETE SHIELD  it may not adhere properly. For this it is advisable to carry out a small preliminary test. Do not apply the product outdoors if rain is forecast. The use of the product is not recommended in humid environments and where there is stagnation of water. In the case of material installed with an open joint and not grouted, the protection concerns the tile and not the entire surface. Check the revitalizing effect on a small portion before applying the product. For daily and extraordinary maintenance avoid the use of alkaline-based degreasing detergents. Use only neutral detergent  CLEANER PRO  suitably diluted.

bottom of page