top of page
EPOXY PRO - instant cleaner for grout 750 ml
Instant cleaner for fresh epoxy grout
 
 WHAT IT'S FOR
  •  Eliminate epoxy grout residues
  •  Ideal for cleaning grouting tools after use
  •  Prevents the formation of a matting halo caused by the failure to remove grout residues
 
 BENEFITS
  •  CONTAINS BIODEGRADABLE INGREDIENTS
  •  RAPID DRY TECHNOLOGY: FAST ACTION, TO BE USED CONTEXTUALLY WITH LAYING
  •  VISCOUS CONSISTENCY, IDEAL FOR WALL CLEANING
  •  RESPECT MATERIALS AND JOINTS
  •  SAFE FOR THE OPERATOR AND FOR THE ENVIRONMENT
  •  HIGH YIELD
  •  DOES NOT DAMAGE ALUMINUM AND STEEL PROFILES
  •  DOES NOT FOAM
  •  USABLE IN INDOOR AND OUTDOOR ENVIRONMENTS, FLOOR AND WALL
 
 IDEAL FOR
  •  PORCELAIN STONEWARE
  •  GLAZED CERAMIC
  •  GLASS MOSAICS
  •  ENAMELED KLINKER
 
 SURRENDER  indicative for 750ml
  •  Large format tiles up to 350 linear meters
  •  Mosaic Up to 15 m²
  •  The yield is indicative
 
 DEMONSTRATIVE VIDEO
 https://youtu.be/MI5MxnKD8IM

EPOXY PRO - instant cleaner for grout 750 ml

€20.00Price
Quantity

  • How to use?

    No dilution:  ready to use

    Application: 
    following the manufacturer's instructions, remove the excess grout by emulsifying with a white pad such as ScotchBrite®.

    Clean the surface with a cellulose-type sponge soaked in water and wrung out.

    Remove all residues with the final finishing wash: spray  EPOXY PRO  homogeneously. Leave for 2-3 minutes.

    Wipe the cellulose sponge again without exerting excessive pressure.

    Rinse frequently with water to keep the sponge clean and to remove any residue from the surface.

    If the finishing wash is carried out a few hours after grouting, leave the product to act for about 20 minutes. For walkability and / or commissioning, refer to the grout manufacturer's instructions.

    Cleaning with  EPOXY PRO  it can be done up to a maximum of 24 hours after grouting. If cleaning has not been carried out within the established times, it is advisable to intervene with CR10 cleaner for cured epoxy residues.

  • ATTENTION!

    Always carry out a preventive test on a small portion of the surface to test the resistance of the material and identify the optimal waiting time for cleaning. Do not use on absorbent materials. Do not use on wood. Do not use on methacrylate surfaces. Do not drip on areas not yet grouted. On metal surfaces, check their resistance to the product in advance.

bottom of page