top of page
MATT - protective wax with natural effect 1 / 5L
PROTECTIVE WAX WITH NATURAL EFFECT
 
 WHAT IT'S FOR
  •  For the maintenance and matt finishing of terracotta, klinker, antiqued marble, natural stone floor treatments
  •  It is the ideal finish after water-based waterproofing
  •  Ideal on internal brick and natural stone walls, on decorative plaster, reconstructed stone and concrete coatings to prevent dusting and gives surface consolidation
 
 BENEFITS
  •  GIVES A NATURAL EFFECT
  •  IT HAS A HIGH CONCENTRATION: IT CAN BE USED AT VARIOUS DILUTIONS DEPENDING ON THE NEED
  •  POLISHED, ALLOWS TO OBTAIN A SATIN EFFECT
  •  IT IS FULLY REMOVABLE
  •  IT HAS EXCELLENT SELF-LEVELING POWER
  •  IT IS REPELLENT TO DIRT AND DUST
 
 IDEAL FOR
  •  COOKED
  •  KLINKER
  •  STONE AND NON-POLISHED AGGLOMERATES
  •  TUFF
  •  RESIN
  •  CEMENTINE
  •  PVC
  •  LVT
  •  SPC
  •  ERASER
 
 SURRENDER -  With a liter of product I do:
  •  Cooked   30 m²
  •  Stone  30-40 m²
  •  "The yields are indicative and are intended per hand"
 
 DEMONSTRATIVE VIDEO
 https://youtu.be/PATjeOHHFr4

MATT - protective wax with natural effect 1 / 5L

€23.00Price
Quantity

  • How to use?

    For the protection of floors and walls : dilute slightly  MATT  to make it more fluid and facilitate its drafting by adding 200 ml of water per liter of product. On a clean and dry surface, apply an even coat of  MATT.

    Wait until completely dry (about an hour) and then pass a second coat crosswise to the first. Once dry (about an hour) the floor can be walked on.

    If you want a slight increase in gloss, you can use a woolen cloth or a polisher. On terracotta and highly absorbing stones (e.g. pietra serena, raw quartzite) it is recommended to apply a coat of waterproofing product in advance such as  FOB XTREME  or  W68. 


    For maintenance : renewal of the finish (every 2-3 months): after cleaning the surface with a diluted solution of  CLEANER PRO  (1: 200), apply  MATT  diluting 500 ml. of product in 5 liters of water. Once dry, the floor can be walked on.

    Restoring the protection (once a year): apply the slightly diluted wax (one 200 ml. Of water per liter of product) with a fleece, rag or other applicator. Once dry, the floor can be walked on For the Anti-dusting treatment: on a dry surface, apply an even coat of product with a brush  MATT  pure. After about an hour the treated surface is dry.

  • ATTENTION!

    It is possible to remove the product using the specific wax remover for water-based waxes  PS87 PRO. It is not recommended to use the product on external surfaces, in humid environments and where there is stagnation of water (bathrooms, showers). The product can change the aesthetic appearance of the material, check in advance on a small portion of the surface.

bottom of page