NATURAL PROTECTIVE OIL
WHAT IT'S FOR
- 3 in 1 product: deeply nourishes, protects from wear and bad weather, revives the natural color of the surface
- For indoor environments it can be used as a basic treatment to be followed by a wax or oil finish
- Suitable for wood, terracotta, natural stones (dark, without light veins)
- For the protection of floors, coverings and small wooden objects
- Applicable outside and inside
- It gives the material a more intense and lively color
BENEFITS
- NATURAL PRODUCT: BASED ON NATURAL RESINS AND PRECIOUS VEGETABLE OILS (TEAK OIL, TUNG OIL)
- BREATHABLE PROTECTION: PENETRATES DEEP WITHOUT LEAVING OILY RESIDUES
- SUITABLE FOR INTERIORS AND EXTERIORS
- IDEAL FOR FLOORS, COVERINGS, FURNITURE, DOORS, BALCONIES, GAZEBO ETC.
- READY TO USE, IT SHOULD NOT BE DILUTED
- FOR WOOD, IT CAN BE USED AS THE ONLY TREATMENT
- IT CAN BE USED FOR THE TRADITIONAL TREATMENT OF COTTO, DARK COLOR RUSTIC STONES (ES, SPLIT SLATE), AGGLOMERATES AND CEMENTINE
- PLANT-BASED PRODUCT: DEVELOPED WITH RAW MATERIALS OF ORGANIC ORIGIN AND RENEWABLE RESOURCES
IDEAL FOR
- WOOD
- COOKED
- STONE AND NON-POLISHED AGGLOMERATES
- TUFF
SURRENDER - With a liter of product I make:
- 20 m² (first coat)
- 30-50 m² (second coat)
- "The yields are indicative and are meant by hand"
NATURE OIL - natural protective oil 1 / 5L
How to use?
No dilution: ready to use
Application:
For wooden floors: shake before use.On a clean and dry surface apply 2 coats of NATUREOIL, at a distance of 2-3 hours from each other, using a brush or fleece spreader, massage and remove the residues.
Carry out the wax finish with NATUREWOOD (FILA DIY Line) if installed on the internal floor.
For furniture and small wooden surfaces: shake before use.
If necessary, remove old layers of paint by sanding well. On a dry and clean surface, spread NATUREOIL pure with a brush evenly.
Within 20 minutes, remove any residue by massaging the surface with a rag. If necessary, apply a second coat of product.
The surface can be used one hour after the last application. For very absorbent materials, apply a third coat in the same way.
For terracotta, stones and unpolished agglomerates, tuff : on a dry and clean surface apply a coat of NATUREOIL using a brush or wax spreader, remove by massaging the residues with a clean cloth.
For interiors it is possible to finish the surfaces with liquid waxes according to the desired aesthetic effect (MATT for a matte effect, SATIN for a satin effect or LONGLIFE for glossy effect).
ATTENTION!
Use only on untreated or oil-treated materials. Avoid use on light stones. Test the product on a small portion of the surface to check for any color changes. Do not apply the product outdoors if rain is forecast. Do not accumulate used rags and dispose of them after wetting them with water.