top of page

PASTE PROTECTIVE WAX

 

WHAT IT'S FOR

  • Wax in paste for the treatment and protection of floors and interior coverings in terracotta, natural stone, cement tiles, wood and Venetian plaster
  • It gives high water-repellent protection to treated floors and coverings
  • It nourishes the materials and restores their color, bringing them back to their original brightness
  • Ideal for the traditional treatment of terracotta: it nourishes, protects and revives the coloring of surfaces
  • Ideal for waxing wooden floors
  • Waterproofs and brightens interior walls finished with antique stucco, Venetian trowel, putty, marmorino, encaustic effect
  • Suitable for the maintenance and finishing treatment of furniture, small wooden furniture items, wooden beams and roofs (inside)
  • Applied regularly, it preserves the treated surfaces over time, protecting them from foot traffic and traffic

 

BENEFITS

  • 3 IN 1 PRODUCT: NOURISHES, PROTECTS AND REVIVES THE COLORING OF MATERIALS
  • MAXIMUM COVERAGE OF USE: APPLICABLE ON COTTO, NATURAL STONE, CEMENTINE, WOOD AND VENETIAN STUCCO
  • SOFT AND CREAMY TEXTURE: EASY TO APPLY
  • INNOVATIVE FORMULATION BASED ON NATURAL WAXES, LIKE BEESWAX: NOURISHES THE MATERIALS, EVEN THE MOST DULL, DEHYDRATED OR SIGNED BY WEAR
  • PENETRATES INTO THE MATERIAL CREATING A LONG-LASTING ANTI-DIRT BARRIER
  • GIVES A STAINLESS REVIVING EFFECT
  • ANTI-WEAR EFFECT: IT HAS HIGH RESISTANCE TO FOOTSTEPS AND TRAFFIC
  • READY TO USE PRODUCT
  • HIGH YIELD
  • NATURAL PASTE WAX WITH BEESWAX

 

IDEAL FOR

  • COOKED
  • MARBLE
  • STONE AND NON-POLISHED AGGLOMERATES
  • CEMENTINE
  • WOOD
  • VENETIAN STUCCO (Venetian spatula, marmorino, putty, encaustic effect)

 

SURRENDER -  With a liter of product I do:

  • Wood   20-30 m²
  • Cooked   20 m²
  • Stone   10-20 m²
  • Venetian stucco (Venetian spatula, marmorino, grassello, encaustic effect)
  • 50-100 m²  "The yields are indicative and are meant by hand"

ULTRA NATURWAX - protective wax in paste 5L

€100.00Price
Quantity
  • How to use?

    Ready to use product.  Mix the wax to soften it before application.

    For the wax treatment of wooden floors: 
    after at least 24 hours from impregnation with NATUREOIL, spread ULTRA NATURWAX with a cloth or sponge; once dry, polish with a cloth or polisher.

    For the treatment and finishing of furniture : on a clean surface, apply a light layer of wax with a clean cloth. After a few minutes, wipe with a woolen cloth to polish. In the treatment of terracotta: after treatment with ES82 or CLASSIC, spread ULTRA NATURWAX in 2 coats at a distance of 8 hours with a sponge or brush and rag. Dry surface, polish with a rag. wool or polisher. Complete the treatment with a finishing wax depending on the desired effect (matt MATT, satin SATIN, CLASSIC or glossy LONGLIFE).

    For the treatment of cement tiles, marble, stone and agglomerates : after treatment with HYDROREP, apply a coat of ULTRA NATURWAX using a sponge, or flat brush and rag. When the surface is dry, polish with a wool cloth or polisher. Then complete the treatment with a finishing wax of your choice between CLASSIC (glossy effect), SATIN (satin), MATT (matt).

    On thresholds, window sills, tombstones, etc. : apply with a dry cloth, massaging until completely dry. The surface will be waterproof and shiny.

    For the protection of antique stucco walls : apply with a steel spatula or stainless steel trowel, using the same technique as the grouting, or with a sponge or rag, if used as a traditional wax. After drying, a few hours after application, polish with a cloth. Repeat the treatment after a few years to renew the protection.

  • ATTENTION!

    Do not let the wax dry out too much and do not use it in excess: you risk opacity and streaks. Always polish with a clean cloth, replacing it as soon as it begins to get dirty or impregnated. It is not recommended to use the product on external surfaces, in humid environments and where there is stagnation of water (bathrooms, showers).

bottom of page