WET EFFECT TONING PROTECTIVE
WHAT IT'S FOR
- Anti-stain and dirt-repellent wet-look protective for surfaces in non-polished natural stone, non-polished agglomerates and terracotta
- Prevents the absorption of stains and facilitates the removal of dirt
- It is particularly suitable for exteriors and also suitable for interiors
- Prevents surface dusting
BENEFITS
- ECOLOGICAL TREATMENT: WATER BASED
- HIGH RESISTANCE TO INTENSE TRAFFIC
- RESISTANT TO ATMOSPHERIC AGENTS
- IT DOESN'T SHELL AND DOESN'T YELLOW
- FACILITATES FOLLOWING MAINTENANCE
- DOES NOT ALTER THE INNELIVITY OF COOKED (UNI EN ISO 10545-12)
- CONTRIBUTES TO THE ACHIEVEMENT OF CREDITS FOR LEED
- PRODUCT CLASSIFIED A + ACCORDING TO FRENCH VOC REGULATION
- PLANT-BASED PRODUCT: DEVELOPED WITH RAW MATERIALS OF ORGANIC ORIGIN AND RENEWABLE RESOURCES
IDEAL FOR
- NOT GLOSSY NATURAL STONES
- NOT GLOSSY AGGLOMERATES
- COOKED
- TUFF
SURRENDER - With a liter of product I do:
- Unpolished stones and agglomerates 10/20 m²
- Cooked 7/20 m²
- "The yields are indicative and are intended per hand"
WET ECO - protective toning wet effect 1 / 5L
How to use?
No dilution: ready to use
Application:
Shake before using. On a dry and clean surface, apply WET ECO with a brush or fleece evenly on the surface, also impregnating the joints well. After 2-3 hours, apply a second coat of the product following the same procedure. Wait at least 12 hours before walking on the surface.Maintenance: diluted solution of CLEANER PRO.
ATTENTION!
On surfaces with low absorbency (slate, botticino, carrara marble) it is advisable to dilute the product with water (1 liter of product in 1 liter of water). Do not apply on smooth surfaces. Do not apply the product outdoors if rain is forecast. The product cannot be applied on substrates with problems related to rising damp. In case of bad application and when a thorough thorough cleaning is required, remove WET ECO using NOPAINT STAR.